To use DL Breach, select Physical Breaching (DLBreach) from the Breach Method drop down in the top left corner of the breaching editor. Selecting DLBreach will make the Physical Breaching (DLBreach) data tab (Figure 1).

Figure 1: Select Physical Breaching (DLBreach) from the Breach Method drop down to activate the DLBreach tab and parameters.
DLBreach requires most of the same data and parameters that the other breach methods require. Enter these data in the left panel of the breach editor. However, some of these values have different definitions or purposes in DLBreach. Define the following parameters and data in the breach editor for DLBreach: