Once you have named your reservoir system, you will need to select all of the reservoirs to be included in the system storage balancing. Only those reservoirs that have not been included in another reservoir system are available to be selected.

To select the reservoirs to be included in the system storage balancing:

  • Choose Edit Reservoir Set from the Edit menu of the Reservoir System Editor. The Reservoir Selection Editor will open ("Figure: Reservoir Selection Editor"). The available reservoirs in your network (that have not been included in another reservoir system) appear in the Available pane on the left side of the Reservoir Selection Editor. To add a reservoir to your new reservoir system, click on the reservoir's name and click Add. To select all of the available reservoirs, click Add All.

    Figure: Reservoir Selection Editor


  • The reservoirs you select will move from the Available pane to the Selected pane on the right. To remove a reservoir from the selected list, click on its name and click Remove. To remove all reservoirs from the Selected list, click Remove All.
  • Click OK to approve your choices and close the Reservoir Selection Editor.

Although you have selected reservoirs for your reservoir system, they will not yet appear in the Reservoir System Editor. You must first specify the system storage balance and define reservoir system storage zones.