A forecast is a simulation that uses current conditions, observed data, and future projections (e.g., precipitation, reservoir operations) to estimate how a watershed or river system will behave over a specified time period. It typically involves integrating multiple models (e.g., meteorological, hydrologic, hydraulic, and consequence models) to predict flows, reservoir levels, potential flooding, and other outcomes to support decision-making for water management, emergency response, or planning.

Before creating and executing a forecast in HEC-RTS, you will need to complete the following steps: 

  1. Create Model Alternatives.
  2. Assign Model Alternative Keys.
  3. Define the Program Order, 
  4. Define Forecast Runs.
  5. Configure the Model Linking.

In the Modeling tab, you specify a forecast time window, run forecast extract and post lists, extract time-series data for the forecast, create and manage forecast alternatives, edit selected model parameters, and run the models.

Example Forecast Run Configurations

For routine forecasting, a forecast run might include the following model alternatives:

  • No future precipitation (HEC-MetVue)
  • Normal conditions (HEC-HMS)
  • Normal reservoir operations (HEC-ResSim)
  • Normal river conditions (HEC-RAS)
  • No flooding consequences (HEC-FIA)

In contrast, when a high rainfall event is anticipated, your forecast run might use these model alternatives:

  • 7-day forecasted precipitation (HEC-MetVue)
  • Wet basin conditions (HEC-HMS)
  • Restricted downstream channel capacity (HEC-ResSim)
  • High channel flow (HEC-RAS)
  • Evacuate with warning (HEC-FIA)

Data Flow in HEC-RTS

The figure below shows the data flow concepts through the five standard analysis applications (HEC-MetVue, HEC-HMS, HEC-ResSim, HEC-RAS, and HEC-FIA). However, you can customize your HEC-RTS watershed by integrating additional applications such as the Ensemble Forecast Processor (EFP), scripts, or RiverWare to meet operational needs. 

Standard Modeling Applications in HEC-RTS

There are five standard modeling applications included in HEC-RTS. 

Meteorological Preprocessor (HEC-MetVue) 

HEC-MetVue combines observed and forecasted hydrometeorological data into a single dataset that can be used by the watershed runoff model, HEC-HMS.

Hydrologic Modeling (HEC-HMS) 

HEC-HMS computes runoff using the observed and future precipitation data, including uncontrolled local flows that are typically used by HEC-ResSim.

Reservoir Simulation (HEC-ResSim) 

After the upstream boundary flows and uncontrolled local flows have been computed by HEC-HMS, you will run the reservoir simulation application HEC-ResSim to operate the reservoirs and compute regulated flows. Reservoir operations might include zones and rules for day-to-day operations, along with zones and rules for extreme events.

River Analysis (HEC-RAS) 

Regulated flows computed by HEC-ResSim are typically used as boundary conditions to the hydraulic routing model, HEC-RAS. Computed flows from HEC-HMS or supplemental models should also be used as input to HEC-RAS. In turn, HEC-RAS computes water surface elevations, which is the input to HEC-FIA.

Flood Impact Analysis (HEC-FIA) 

HEC-FIA analyzes impacts within inundated areas based on computed hydrographs from HEC-ResSim and elevations from HEC-RAS. HEC-FIA calculates flood damage determined by rising stage in a stream, river, lake, or reservoir. HEC-FIA also computes action reports that tell emergency responders what they need to do based on the computed stage values.