HEC-RTS automatically sets the debug level for the HEC-DSS log file to 3. If needed, you can adjust this setting in the Debug tab by entering a debug level between 1 and 6 in the DSS Debug Level box. Be aware that increasing the debug level may result in very large log files, as it controls the amount of HEC-DSS debug information written to the HEC-RTS log file. The location of the Logging Properties File is also displayed in this tab.
More information about the logging levels can be found in the table below.
| Message Level | Description |
|---|
| 0 | No messages, including error (not guaranteed). Highly discouraged |
1 | Critical (Error) Messages. Discouraged. |
2 | Minimal (terse) output: zopen, zclose, critical errors. |
3 | General Log Messages. Default. |
4 | Diagnostic User Messages (e.g., input parameters) |
5 | Diagnostic Internal Messages level 1 (debug). Not recommended for users |
6 | Diagnostic Internal Messages level 2 (full debug) |