Return to Task 1. Examine Data in HEC-SSP.

Extract Extremal (Annual Maxima) Events

High flows and large precipitation events do not always coincide along the Tygart River. In many cases, it is unclear which variable is driving the joint probability. As a result, we will model two joint probability scenarios:

  1. Extreme flow events and the near coincident precipitation events, and
  2. Extreme precipitation events and near coincident flow events. 

In this workshop, we will define extreme events using annual maximum series. However, using a partial duration series to define extreme events is also appropriate.

Extract 1-day Flow Annual Maximum Series

  • Right click on the flow dataset (TYGART VALLEY RIVER-PHILIPPI, WV-FLOW-USGS) and select Filter Data.
  • Select the Peaks tab. 
  • Under the Annual Maxima panel, select the Filter to Annual Maxima checkbox. In the Start of Year field, enter 01Oct. The Data Filter should appear as in the image below.
  • Select the Save Filtered Data Set As button.
  • In the Name field, remove Filtered and append AMS. Change the F-part to USGS - AMS. The Saveas New Data Set dialog should appear as in the image below.
  • Click OK.
  • Hold the Ctrl button your keyboard and select the two flow datasets. From the top ribbon, select Data | Plot to visualize both time series.
  • Close the plot.

Extract 3-day Precipitation Annual Maximum Series

  • Right click on the 3-day precipitation dataset (TYGART VALLEY RIVER-PHILLIPPI WV-PRECIPITATION-USC00466982 3 DAY TOTAL) and select Filter Data.
  • On the Dates and Thresholds tab, select Filter Data by Time Window under the Time Window panel.
  • Enter a Start Date of 01Oct1896 and an End Date of 30Sep2010 to filter to complete water years.
  • Select the Peaks tab. 
  • Under the Annual Maxima panel, select the Filter to Annual Maxima checkbox. In the Start of Year field, enter 01Oct. 
  • Select the Save Filtered Data Set As button.
  • In the Name field, delete TOTAL-Filtered and append AMS. Change the F-part to 3 DAY AMS. The Saveas New Data Set dialog should appear as in the image below.
  • Click OK.
  • Hold the Ctrl button your keyboard and select the three precipitation datasets. Select the 3-day cumulative precipitation dataset before the 1-day precipitation dataset so that the latter plots in front of the former. From the top ribbon, select Data | Plot to visualize both time series.
  • Close the plot.
  • Note that we will use the 3-day AMS and 3-day cumulative precipitation time series for the rest of the workshop. 

Question 1. Tabulate the 1-day flow AMS and the 3-day precipitation AMS. Do these events always occur on the same date/within a few days of each other?

No, the flow and precipitation annual maxima do not always occur within a few days of each other. Therefore, the annual peak events at these two stations are not always coincident.

Continue to Task 3. Determine Ordinal Association Between Variables in R.