This document summarizes a series of test cases performed to verify and validate calculations within HEC-ResSim (Hydrologic Engineering Center's Reservoir System Simulation) software.
The purpose of performing these tests with HEC-ResSim is to demonstrate that the HEC-ResSim computational code is working correctly, as well as to demonstrate that mass balance is not violated when applicable.
Overview
The table below displays the HEC-ResSim operational calculations validation and verification reports.
Topic
No content found.
This is the list of HEC-ResSim's physical calculations to be verified and validated. Initial test cases have been developed for twelve of these calculations. Documentation of test results is yet to be developed. Further expansion on these tests can be used to validate more complex scenarios that go beyond the basic calculations.
Routing Methods
Gates
Controlled
Uncontrolled
Pool storage
Starting condition (Lookback)
Time Step and Flow Computation-Time Blocking
Leakage/Overflow
Evaporation
Seepage
Tailwater
Forebay
Hydropower
Diversion
Pump
Local Flows
Interpolation
Multiplier
Factors
negative
Flows
Cumulative
Regulated
Unregulated
Holdouts
Datum shifts
Mass conservation
Storage integration
Flow network
Lossess
Reaches
Junctions
Outlet groups
Inflow
Net Inflow
Outflow
Simulation Related Calculations
Overview
This is the list of HEC-ResSim's simulation calculations to be verified and validated.