This section of the manual describes results that are available for the Coincident Frequency Analysis. When the user selects the Results tab on the Coincident Frequency Analysis editor, the window will appear as shown in Figure 1. Both tabular and graphical results are included. The percent chance exceedance ordinates are the same as those defined on the General tab. In addition, the Data Name and Data Units defined on the General tab are used in the column header in the results table and the y-axis label in the plot.

Figure 1. Results Tab of the Coincident Frequency Analysis Editor.

By pressing the Plot Condition Frequency Curves, the user can plot the response curves entered on the Response Curves tab along with the computed curve and the upper and lower accurate limits.

Figure 2. Plot of Conditional Frequency Curves.

Data in the frequency curve table can be re-sorted. Click the Percent Chance Exceedance column header (two mouse clicks are required the first time). The percent chance exceedance ordinates, along with frequency values, will sort so that the lowest values are on top or the highest values are on top.